Easy to use and learn user interface;
End-of-cycle buzzer;
Vertical loading of the sterilization chamber;
Easy maintenance;
AISI 304 stainless steel construction;
Equipment fully built in stainless steel, free from ferrous materials
Equipped with condenser for steam exhaust;
Double safety system against over pressure;
Equipped with bacteriological filter.
UNICLAVE 99
The sterilization chamber is cylindrical and made of AISI 304 L stainless steel. The lid is manual and also made of stainless steel AISI 304 L. The operation of the Uniclave 99 autoclave is fully automatic because it is controlled by a PLC microprocessor system and thus the sterilization chamber is manually filled with water. It is preprogrammed with 9 cycles of sterilization. It is possible to set the cycle. It has a 3.5’ touchscreen in the front panel.
Loading baskets;
Heating elements protection tripod and basket support.
Loads of use in analysis and research laboratories:
– 20 min pre-programmed cycle at 121ºC with drying;
– 5 min pre-programmed cycle at 134ºC with drying;
– Possibility, by the chief user, to preset seven more cycles, in a temperature range between 75ºC and 135ºC.
| Network | Features |
| ELECTRIC | 3 ~ + N + T 400 V 50 Hz 6 kW |
| DEMINERALIZED WATER | Maximum pressure 6 Bar Minimum pressure 3 Bar 3/4” BSP connection |
| DRAINAGE | Material resistant to 100 ºC 3/4” BSP connection |
TECHNICAL FEATURES
| MODEL | USABLE VOLUME OF CHAMBER liters |
USABLE VOLUME OF CHAMBER (DxD) cm |
OVERALL DIMENSIONS (WxHxD) cm |
| AJC 80 | 80 | 40×63 | 69x105x74 |
| AJC 120 | 120 | 50×82 | 80x105x85 |
| AJC 160 | 160 | 40×63 | 80x125x74 |
